First mount the frame of the seat into the seat lock (12) of the ISOFIX base. Guide the seat (A) as shown, opposite to the driving direction over the base (B). Turn the ISOFIX SYSTEM (08) control dial to the right until the CONCORD ULTIMAX lies as close/flush as possible to the back rest of the car seat.ĭo not use on seats with airbags. _ MOUNTING THE SEAT OPPOSITE TO THE DRIVING DIRECTION (FROM BIRTH TO 13 KG) Now reinsert the seat, depending on the age of the child either in the driving direction or opposite to it (see „MOUNTING THE SEAT OPPOSITE TO THE DRIVING DIRECTION (FROM BIRTH TO 13 KG)“ or „MOUNTING THE SEAT IN THE DRIVING DIRECTION (FROM 9 - 18 KG)“). ![]() Push the child seat backwards onto the ISOFIX receptacles until the locking mechanisms of both ISOFIX adapters (15) audibly lock into place and the safety displays (14) on both sides of the base are green! Place the base in the direction of driving on a vehicle seat equipped with ISOFIX receptacles. Pull the upper part of the lock (06) forwards and push the lock down. The unlocking mechanism of the seat lock (06) is at the front underneath the seat on the top of the ISOFIX base. Turn the ISOFIX SYSTEM (08) control dial on the front of the CONCORD ULTIMAX ISOFIX base to the left until the ISOFIX adapter (15) on the reverse is fully extended. To make mounting easier, we recommend removing the seat (A) of the CONCORD ULTIMAX from the base (B) (see „REMOVING THE SEAT“). Move the tilt adjustment operating lever (05) at the front of the seat upwards and bring the seat into an upright position. The seat (A) of the CONCORD ULTIMAX can be removed from the ISOFIX-Basis (B). Should your vehicle not be listed, please ensure that the CONCORD ULTIMAX can be properly mounted in your car / on the desired seat before you purchase the child seat!Read the user manual provided by the manufacturer of your vehicle and the mounting and security instructions contained in this user manual. The appendix CAR FITTING LIST contains an overview of vehicles and vehicle seats that have been approved for using the CONCORD ULTIMAX with ISOFIX system in connection with a support leg. The CONCORD ULTIMAX with ISOFIX system has been approved for ‚semi universal‘ use, and is suitable for mounting on specific vehicle seats. The seat consists of 2 parts: the seat (A) and ISOFIX base (B). As a result of accident statistics, however, we recommend using the seat behind the front passenger seat. Make sure to instruct your passenger on how to remove the child from its safety seat in case of an accident or danger.Ěfter an accident, the entire child restraint system must be replaced or sent to the manufacturer for testing, along with an accident report. ![]() ĝo not attempt any modifications to the restraint system as they might endanger your child‘s safety. ![]() The child restraint system must not be damaged or crushed by moving parts in the vehicle or by the vehicle doors.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |